If it is found that the knife of the hardware counting packaging machine is constantly cutting the bag, first check whether the temperature is reached. If it is still cutting, add a small piece of copper to the knife seat.
The adjustment of the rear pressure wheel is the same as that of the front pressure wheel, loosen the screw to adjust the angle.
If the gap between the middle sealing strips is too large, the film is not tightly sealed, or the gap between the middle sealing strips is too small, the film will always fall off, you can adjust the adjusting screw on the heating strip, tighten or loosen, and adjust appropriately.
If the pressure wheel falls off the membrane or presses too hard, loosen the upper screw to adjust the angle of the pressure wheel. If the film is uneven, adjust the lower black torsion bar, the torsion bar shows in and out. After installing or replacing the film, first run it dry to check whether the film is smooth, replace the film according to the machine schematic diagram or the video guide of the technician, and confirm that the front and back of the packaging film are high temperature resistant on one side and glued on the other side.
Hardware counting packaging machine customization requirements: according to packaging requirements, non-standard customization. Single counting, various mixed counting packing, automatic arrangement, automatic counting, automatic material, automatic sealing and other automatic packing process. How to customize, please explain the packaging requirements in detail; the expansion tube is introduced into all walks of life, the packaging requirements in the market are different, the combination is different, and the equipment customization is different.
The packaging materials of the hardware counting packaging machine include main packaging materials such as metal, plastic, glass, ceramics, paper, bamboo, wild mushrooms, natural fibers, chemical fibers and composite materials, as well as paints, adhesives, decorative tapes, printing materials and other auxiliary materials.
