Nowadays, the surprises that packaging brings us are everywhere, reflected in the corners of our lives, and constantly enriching our daily lives. However, for packaging, the hero behind it is our automatic packaging machinery. Many people are ignorant of the automatic packaging machine. This fully automatic packaging machine is a fully automatic packaging machine designed by Kaili mainly for hardware products. It is mainly suitable for automatic counting and packaging of screws, nuts, nails, gaskets and other materials. The following five points must be kept in mind:
1. The inside and outside of the machine must be cleaned before and after starting up, and the parts with food passing through must be strictly disinfected.
2. Please check whether the oil level of the gas source triplet oil storage tank is kept above 1/3 before going on and off work every day. If it is less than 1/3, you should inject 20 # pure engine oil to about 1/2 of the tank body.
3. The oil cup on the horizontal seal bracket should be filled with 20# oil once every day before starting the machine.
4. The unused packaging film should be taken out after work to avoid bending the support tube.
5. If materials are found in the vertical seal or the horizontal seal during the opening machine, the machine must be shut down immediately and the vertical seal or horizontal seal tooth surface must be cleaned with a copper wire brush.
Nowadays, fully automatic packaging machines are popular in the market and become the darling of the industry. Good packaging really needs good equipment to help. In short, with the rapid development of the hardware industry today and the fierce competition in the packaging machine market, hardware packaging machinery manufacturers must work hard on automatic intelligent packaging machines to better Our products serve customers and achieve a win-win situation.
