This granule packaging machine relies on these to seize the market
In the packaging machinery industry market, although the price of the hardware packaging machine is much higher than other packaging machine equipment, it is also because this packaging machine is relatively strict in terms of packaging technology and material requirements. Therefore, when manufacturing this packaging machine, Kally Machinery uses good stainless steel material and good packaging technology. In addition, the automation and intelligent production of its equipment has further accelerated the pace of production development of the enterprise. Advanced process skills, exquisite packaging technology, excellent performance, excellent quality and other advantages and characteristics have better endowed its equipment with advantages and characteristics. Good packaging quality and effect, therefore, hardware packaging machines are ahead of the ever-changing market. However, after the machine has been used for a long time, the hardware packaging machine also needs maintenance:
1: When the hardware packaging machine moves back and forth during work, please adjust the screws on the front bearing to the proper position. If the gear shaft moves, please adjust the screws behind the bearing frame to the appropriate position, adjust the gap so that the bearing does not make a noise, turn the pulley by hand, and the tension is appropriate. Too tight or too loose can cause damage to the hardware packaging machine. ；
2: Check the machine parts regularly, once a month, check whether the worm gear, worm, bolts on the lubricating block, bearings and other movable parts are flexible and worn. If any defects are found, they should be repaired in time and should not be used reluctantly;
3: After the hardware packaging machine is used or stopped, the remaining granular materials in the tray should be cleaned up, and then installed, ready for the next use.
4: If it is out of service for a long time, the whole body of the hardware packaging machine must be wiped and cleaned, and the smooth surface of the machine parts shall be coated with anti-rust oil and covered with a cloth canopy.
