When the multi-pipette packaging machine is started, the actual current of the motor will be more than 5 times higher than the rated value, which not only reduces the service life of the motor but also wastes more power. A multi-tipped straw packaging machine should have a certain margin for the motor selection during design.
The multiple straw packaging machine is a device for automatically packaging a straw in a plurality of beverages into a bag. The whole machine is composed of a transmission system, a film automatic tension unwinding device, a pipe filling device, an automatic sealing and cutting device, a finished product conveying device, and the like. With a high degree of automation, the production speed can replace more than 10 manual operations, saving material and personnel costs, and multiple packaging, bagging, filling and packaging are completed at one time. The automatic counting of multiple straw packaging machines can facilitate secondary packaging, the packaging speed can be adjusted, the number of packaging can be adjusted from 2 to 100, and the special counting specifications can provide corresponding improvement.
If the line of the multi-tipped packaging machine does not pass one of the phases, there will be problems such as slow heating. If the magnetic switch is normal, you can check the meter to see if the ohmic values of the phases and the machine are the same. If there is no abnormality in each phase and there is still a problem with the line, then it is necessary to replace the heater of the multi-tipped packaging machine to solve it. If the multi-pipette packaging machine encounters the film material deviation, it may be that the upper film material deviates from the material chain, and the direction of the upper triangular plate can be adjusted to make it biased clockwise. If the underlying film material deviates from the entrainment chain, it can be solved by counterclockwise adjustment.
