After buying a screw packing machine, you must consider how the screw packing machine should be maintained. Only in this way can our machines serve us for a long time. Just like a car, it can be opened for a few years without the maintenance and repair. The screw packing machine is also the same. Kally machinery is a brand of packaging machinery industry for more than ten years. We have manufactured numerous screw packing machines, about the maintenance of the screw packing machine. Maintenance knowledge, it gives us the following:
1. Pollution
There are three main directions for pollution control. One direction is source control, the other is protection against pollution diffusion, and the third is collection, treatment and recycling of pollutants. The most common way to solve pollution during cleaning is to clean up. There are also many ways to clean. According to the actual equipment of automatic packaging machine, different cleaning methods are designed. For example, using compressed air cleaning, in order to avoid dust moving, more industrial vacuum cleaners can be used for cleaning; The parts of the automatic packaging machine should be cleaned by wiping. According to different automatic packaging machine equipment, the wiping tools can make cotton cloth, cotton yarn and soft paper lamp; some need to be wiped with organic solvent, some can not use organic solution; some need to use Kerosene cleaning, some need to use copper brush, and some need to scrape with a copper scraper.
2. cleaning difficult
There are three directions for solving the difficulty of cleaning. One is to control the source, so that these difficult parts are not polluted; the second is to design and develop special cleaning tools to make it difficult to clean and easy to clean; the third is the diversion of pollutants, treatment and Recycling.
3, failure
The key to solving the fault lies in understanding the conditions under which the fault is formed, and controlling or hindering the generation or development of the fault forming condition by some means. Once the fault occurs, it is necessary to analyze the law and cause of the fault, and then take corresponding measures to avoid it, and to find a solution and implement it according to the conditions and reasons for the formation.
To be continued......
