Maintenance and scope of application of pillow packaging machine
Pillow packaging machine is currently the domestic automatic continuous shrink packaging equipment, using quartz far-infrared tube heating, energy saving and high efficiency (over 15% of electricity); the shrinking temperature and motor transmission speed are stable and adjustable, and the adjustment range is wide; original roller rotation The device can work continuously. Therefore, the heat shrinking machine has the characteristics of advanced design, stable and reliable performance, power saving and high efficiency, good shrinkage effect, novel and beautiful structure, convenient operation and maintenance, etc., which can be applied to shrink packaging of any shrink film. Compared with the previous shrinking machine, the performance is better, the packaging effect is better, and it can be used with confidence. The pillow packaging machine can pack regular objects such as moon cakes, buns, shaqima, popsicles, biscuits, daily necessities, seafood, toothbrushes for hotels, etc.
Maintenance of the two parts of the packaging machine
Let me talk about the maintenance of the electrical part first:
★The operator of the pillow packaging machine should always check whether the threads at each joint are loose before starting;
★Dust and other tiny particles may also affect part of the functions of the packaging machine. When the probes of the photoelectric switch and proximity switch are covered with dust, they may cause malfunctions, so they should be checked and cleaned frequently;
★Detailed parts are also the focus of mechanical cleaning. For example, regularly use soft gauze dipped in alcohol to clean the surface of the horizontal seal electric slip ring to remove the carbon powder on the surface.
★Some parts of the pillow packaging machine cannot be changed arbitrarily. Non-professionals are not allowed to open the electrical part. The parameters or programs of the inverter, microcomputer and other control components have been set, and random changes will cause the system to be disordered and the machine cannot work normally.
Then there is the Runwei of the packaging machine:
★Rolling bearings are the parts with severe wear in the machinery, so each rolling bearing should be greased with a grease gun once about two months;
★Different parts of the lubricating oil are of different types, such as the bushing on the packaging film supporting roller, and the bushing at the front sprocket of the feeding conveyor should be filled with 40# machine oil in good time;
★The bite operation of gears is also very important, each gear should be dripped with 40# mechanical oil in time;
★The lubrication of the chain is the most common, relatively simple. Each sprocket chain should be dripped with mechanical oil with a kinematic viscosity greater than 4O# in a timely manner; ★The clutch is the key to the start of the packaging machine, and the clutch part should be lubricated in time.
