Hinges, also called hinges, are mainly used for cabinet doors and wardrobe doors. It generally requires a plate thickness of 18-20mm. Holes need to be punched during installation, and the opening diameter is generally 35.
There are detachable directional hinges and non-detachable non-directional hinges. Common non-detachable spring hinges can be divided in shape: full cover (or straight arm, straight bend) half cover (or curved arm, middle bend) inside (or large bend, large bend)
Normally, it need 4pcs of screws . But do you know how to pack it?
If only pack hinge and screw, double feeder counting packing machine is recommended .
And for wooden pin, connector, bolt, screw, plastic anchor, etc. please refer to our multiple feeders hardware sorting packing machine.
