The metal screw packing machine adopts the advanced microcomputer packaging controller, and the excellent man-machine dialogue mode enables the speed, bag length and cut-point position detection to be directly displayed on the interface. In the hardware packaging industry, the industry is widely used. In addition to the quality problems of the machine itself, the quality, speed and operation of the packaging cannot be ignored.
The following describes the precautions for the use of the hardware screw packaging machine:
1. Before and after the packaging of the hardware screw packaging machine, be careful to keep away from sharp objects and avoid scratching and forming a leak. During the vacuum packaging operation, the Zui is carried out on a clean surface. If there are hard objects such as buttons and zippers in the stored items, fold them inside and put them in the collection bag. When you are in the cabinet or other local storage, you should also pay attention to the storage address with or without sharp items to ensure that the bag is intact.
2, pay attention to the contents of the contents and the size of the package, the contents of the goods inside the bag, should be less than 3-5 cm from the seal, large items do not force into the, if necessary, order a large bag from scratch.
3, to ensure that some of the sealing of the cleaning, if there is fiber, dust entering, will reduce the sealing function. If it is found to be dirty, the demand can be used after cleaning. Keep it in mind and keep it in mind.
4. After the hardware screw packaging machine is packed, it is necessary to check the sealing of the vacuum packaging bag again to ensure the sealing. This process is important to ensure the safety of the goods in the later stages.
