86-135 8757 1010

Maintenance details of the visual dispenser

May 14, 2020

The visual dispensing machine can also be called CCD dispensing machine. Compared with other ordinary dispensing machines, the visual dispensing machine is especially in the word "vision". It can simulate the human eye and automatically locate the product position for this purpose. Dispensing work, and our new technology intelligent dispensing machine dispensing needle fine to 0.01mm, 0.7 seconds to intelligently identify thousands of products, random placement of products, intelligent full-frame identification.


Automatic vision dispensers are more and more commonly used in production. They are used in daily production. We must pay attention to the maintenance of visual dispensers, so as to avoid sudden problems in the production process of the dispenser and affect the enterprise. Operation.


The visual dispenser also has a service life. Whether we can maximize the benefits of the visual dispenser depends on whether we have comprehensive operation and maintenance of the dispenser, and the maintenance of the dispenser will not be corroded, increasing the use time of the dispenser Dispensing opportunities without maintenance are less than half of the working time of the dispenser, so the dispenser needs to be maintained.

glue dispensing machine

The daily maintenance of the visual dispenser is mainly to pay attention to the following points:


Corrosion, when we finish our work, we should clean the glue and the water on the dispenser to avoid corrosion of the dispenser.


Cleaning, when you need to change the type of glue, you should clean the dispensing pipe in time, pour out all the remaining glue, pour the cleaning liquid from the feed port, and clean the remaining glue slag, so that the visual dispenser maintenance effect higher.


Power off, when our visual dispenser is not working for a long time, we need to unplug the power supply to reduce the operation cycle of the dispenser.


Air pipe, when the dispenser is restarted, there will be blisters in the air pipe due to the abnormal intake, which will cause the instability of the glue. Just remove the water vapor in the pressure regulating pipe and check whether there is a problem with the supply pressure machine. To improve the maintenance effect of the dispenser.



Send Inquiry