This part of the vertical automatic packaging machine former is an important part of the vertical automatic packaging machine. If there is a problem with the bag forming, it must be related to the former not being adjusted properly. Then we installed the vertical automatic packaging machine for the first time When installing the shaper, which aspects should we pay attention to?
Precautions for the first installation and installation of the vertical automatic packaging former:
1. Elephant Trunk Shaper:
①Pay attention to the position of the sealing line (whether the connecting line of the two guide angles is parallel to the sealing line and 5-10mm ahead of the sealing line);
②The position of the longitudinal seal and the former (cannot collide with any mechanism);
③The position of the film pulling wheel;
④Whether the material receiving port will drop material;
⑤The guiding angle should be 20mm from the horizontal sealing roller plane position;
⑥Whether there is a difference of 3-5 degrees between the former and the side column of the machine;
⑦The center of the former coincides with the tangent position of the longitudinal sealing line and the film pulling wheel at three points.
