Why is the plastic vibrating plate unstable? When the plastic vibrating plate does not work properly, vibration is fatigued or too slow, scattered or irregular feeding, then it is estimated that there is a problem. Where is the problem, let's analyze it in detail.
1. The electromagnet gap is inappropriate.
2. The machine rhythm is too fast, causing the parts to slip in the vibration plate.
3. Too much material.
4. The turbulence of the power grid causes voltage instability.
5. Parts problem: Irregular parts or oily reasons.
6. Improper adjustment of the plastic vibration plate vibration plate chassis.
7. The spring sheet is broken, which requires replacement of a new spring sheet and debugging to make the machine stable.
8. The bottom plate is not too thick.
9. Defects and insufficient hardness of the installation table. If it is suspended on the equipment table, the vibration will be too weak. The thickness of the table must be at least 1-1/2' so that it will not absorb vibration. The cylindrical support must be equipped with a triangular support piece.
10. The table top is not level.
11. There are sundries in the plastic vibration plate
Our engineers put a lot of thought into every component of the hardware counting and packaging machine, striving for customer satisfaction with our products.
For more non-standard customization, please email: xoyo77@gmail.com
