The detailed parameters of the hardware screw packaging machine are as follows:
1. Packaging materials for screw packaging machine: OPP/CPP, CPP/PE and other heat-sealable composite materials (≤380mm);
2. Feeding equipment of screw packaging machine: automatic feeding machine, only need to pour the material into the hopper, more materials can be put at one time;
3. Packaging speed of hardware accessories packaging machine: 8-15 bags per minute (depending on different materials and different packaging quantities);
4. The size of the screw packaging machine bag: the maximum width of the bag is within 180mm (the width can be adjusted by replacing the former), and the maximum length of the bag is within 225mm (the bag can be pulled twice to 280mm);
5. Hardware accessories packaging mechanism bag device: trunk forming, pneumatic sealing, pneumatic cutting;
6. Weighing range of screw packaging machine: 30-2.5kg;
7. Hardware accessories packaging machine bag: back sealing;
8. Special functions of the screw packaging machine: the bag is supported by a partition, which can be placed in the bag and deformed because it is too heavy;
9. Cutting method of hardware accessories packaging machine: pattern knife sawtooth cutting;
10. Sealing and embossing of screw packaging machine: straight or reticulated sealing;
11. Edge sealing width of hardware accessories packaging machine: 5-10mm optional;
12. Bag length control of screw packaging machine: display screen setting, cursor tracking mode;
13. Exhaust method of hardware accessories packaging machine: pinhole exhaust or sponge exhaust;
14. Equipment size of screw packaging machine: 1350*1000*1600 (subject to the actual situation)
15. Power supply voltage of hardware accessories packaging machine: 220V 50HZ
16. Air pressure of screw packaging machine: 0.4-0.8Mpa
