Common sense of use of hardware packaging machine
The packaging net weight of the hardware packaging machine is generally in the range of 1-100 pieces. It is used to package various hardware materials. The equipment has high working efficiency and requires less energy consumption. More than 300 watts can completely put all the normal capital into work and manufacturing, but the precision of the mechanical equipment is very high, the floor space is small, the site utilization rate is high, and the energy consumption is low.
The reversibility of hardware is very large. Pay attention to the reliability of accessories and transmission loss when the transmission belt is transmitted. The indoor space occupied by the belt conveyor is not large, which greatly increases the coordination ability of the transmission belt, and the high transmission efficiency can obtain a stronger guarantee. , In addition, because its own net weight is relatively low, it requires less energy consumption, and energy-saving high efficiency is the biggest feature of the hardware packaging machine. The accuracy of the granule packaging machine is 0.2 class, and the working pressure is generally under the atmospheric pressure of 0.4 to 0.6.
The basic state of the hardware packaging machine is that, people can use it to do many useful jobs. To reduce the cost of large work, polypropylene and high-pressure polyethylene are good packaging products.
Maintenance of hardware packaging machines is indispensable for long-term applications.
Part Lubrication
1. A part of the shell of the equipment is equipped with an oil gauge. Before driving, all oil should be supplied once. Halfway, it can be added according to the temperature and operating conditions of each rolling bearing.
2. The worm gear and worm housing must store the motor oil for a long time. The oil level and height-width ratio are all invading oil of the worm gear and worm. If it is used frequently, the oil must be changed every three months. use.
3. When supplying oil to the equipment, it is not necessary for the oil to overflow outside the cup, let alone flow into the surrounding and soil of the equipment. Because the raw material oil is very easy to pollute the raw material environment and endanger the product quality.
Hardware packaging machine maintenance precautions
1. Regular maintenance of parts, carried out once a month, to check whether the worm gear, worm, anchor bolts on the lubricating block, rolling bearings and other thematic activities are flexible and damaged, and found defects should be repaired immediately, not suitable for use.
2. The equipment should be used in a dry and clean room. It should not be used in places where there are acids in the air and other vapors that are corrosive to the human body.
3. After the application of the hardware packaging machine is completed or terminated, the rotating drum should be removed to clean up and brush the remaining powder in the bucket, and then install it properly for full preparation for the next application.
4. If it is not used for a long time, be sure to wipe the equipment all over, coat the bright surface of the parts with anti-rust agent, and cover it with a cloth awning.
