According to the size of the fasteners, the customer's individual requirements and the number of bags after bagging, the fasteners should be packed neatly, orderly and compactly in the box. The box is full, but the surface of the box must not be protruding. .
No matter which form the fasteners are packed into the bag, the counting method of the fasteners in the bag shall be the same for the fasteners delivered to the same customer in the same batch, the same specification, the same material, and the same batch.
All the packaging boxes need to be labeled with fasteners after they are installed. The labels should be pasted on the end of the packaging box.
To the content of the label should be clear and complete. The content of the label should generally include the fastener standard code/drawing number, fastener name, specification, and fastening in the box The total number of pieces, batch number, material brand, manufacturer name or its code and trademark.
Usually fasteners are boxed in the following situations:
(1) For the fasteners packed in bags, since the fasteners have been packed in plastic bags or kraft paper bags, the fasteners in the bags should be neatly packed when packing. Pack it in a packing box compactly, close the lid after filling, and put a label on the box. Rubber fasteners must be loosely packed when packing, and no extrusion, Pressing and forcibly stuffing, no folding or twisting of parts is allowed.
(2) For the fasteners of cluster packaging, when white paper or oil-sealed paper is used to pack several or more fasteners together, they should be packed directly When packing the box, the fasteners after the cluster packaging should be placed neatly and compactly in the box. Placed in layers. Until the entire box is filled, layer and layer if necessary. Ask to pad with sponge paper. When there is a gap in the box, fill the gap with shredded sponge paper or paper scraps to prevent fasteners from occurring during transportation. Flutter. After closing the lid, stick a label outside the box. If necessary, it should be wound along the outer circumference of the box in a crisscross pattern! One or two rounds of transparent tape. Prevent the box from loosening.
(3) For fasteners in a single package, use sponge paper to wrap the fasteners in one piece, or use a plastic mesh sleeve to cover the single fasteners. After the packaging is completed, Place the packed fasteners neatly, orderly, and compactly in the packing box, layering them until the whole box is filled. After the placement is complete, when the box is returned When there is a gap, fill the gap with soft materials such as shredded sponge paper or shredded paper as an inner lining to prevent the fastener from being damaged during transportation. To prevent the package Pack the box and spread it out.
If necessary, wrap the cellophane tape along the horizontal and vertical directions of the packing box. Boxing requirements for fastener certification materials: Generally, the certification materials required by customers such as product certificates, test reports, test pieces, and material certificates Place the materials in the first packaging box of the same batch of products. Make a mark or stamp on the packaging box (such as "certificate" or Box list, etc.) to facilitate customer identification. When the customer needs more certification materials, they should be folded and installed in the same transparent Put it in a plastic bag. After sealing, put it in an empty box, and finally paste a label on the end of the box. The label content must be the same as the The content of the label pasted on the fastener box is the same, such as product name, product standard, product batch number, material brand, manufacturer name, etc.
