1. Before opening the automatic screw counting packaging machine, first observe whether there are any abnormalities around the machine.
2. When the automatic screw counting packaging machine is in operation, do not put your body, hands and head close to or touch the moving parts
3. Do not magically seal your hands and tools in the knife holder
4. When the automatic screw counting packaging machine is running, do not switch the operation buttons frequently. Two or more people operate the automatic screw packaging machine at the same time, turn on the power during repair and maintenance, and the machine works at super high speed for a long time. These are all incorrect operation methods. Incorrect operation methods can cause damage to the machine or shorten its service life.
The automatic screw counting packaging machine adopts the form of vertical three-side sealing bag. The packaging material is aligned by the bag former through the tension guide mechanism, and the bag is formed by the horizontal sealing and vertical sealing. The material is fed through the vibrating plate and filled with light soldering. The bag, then, the bag is pulled by the paper roller, the next bag is long, and the heat sealer does the sealing action again to seal the upper mouth of the previous pocket, and at the same time complete the sealing of the bottom and longitudinal edges of the next pocket. A cutter cuts the filled and sealed pockets at the correct sealing position to make a finished product, and the packaging process is completed in this way.
