The ideal processing effect of the hardware packaging machine is inseparable from daily and reasonable maintenance
The development of the times has spurred the packaging industry to grow stronger and stronger. During the long-term development of the packaging industry, hardware packaging machines continue to improve their functional characteristics, innovate technology, continue to take the road of high-tech development, and inject advanced automated operation methods. The more advanced equipment is continuously recognized by the market.
Hardware packaging machine
In order to achieve the ideal use effect, we need to carry out daily maintenance of the hardware packaging machine, and the daily operation process must be correct. The correct operation steps are the main conditions for the operation of the machine. This will not only extend the service life of the packaging machine, but also reduce machine failures. Thereby improving production efficiency. In addition, due to the large workload, the machine needs to be in a good lubrication state. Lubricate the wheels, chains, etc. once a week. Third is the maintenance of the adjustable part. The height of the worktable, the tightness of the conveyor belt, the height of the upper conveyor and the adjustment of the lower width all need scientific and correct positions to make the machine work normally. Operators should also understand common failures and maintenance. When the machine fails, please cut off the power supply. Maintenance personnel should bring anti-electric safety equipment and cannot perform maintenance at will.
Regularly check whether the screws of each part of the hardware packaging machine are loose, lubricate the important parts of the machine, and clean the surface of the machine, especially the blades must be cleaned with alcohol every day to keep the blades free of foreign matter. It is the fault and troubleshooting method. If the tape is not in the center of the box, adjust the bolts to make the tape stick in the center. If the tape is cut continuously, the problem is that the blade position is too low. Just adjust the blade upward, but you can't adjust it too high. If the blade is too high, it will easily scratch the box. Therefore, the position of the blade is important on the right palm. Adjust to the right position. This is related to the stable operation and service life of the packaging machine.
