The automatic screw packaging machine is evolved from the traditional packaging machine. The photoelectric system is applied to the packaging machine, and the optical signal is converted into an electrical signal, which is controlled by the PLC system and uses a pneumatic device, so that the counting is very accurate. The screw packaging machine has high working efficiency, up to 50 packs per minute, saving more than 90% of labor. And it is a pneumatic device, and the power consumption is 1/200 of the traditional one. Applied to hardware, furniture, electronic products, bathroom, lighting, cabinets, food, toys, medicine and other industries. Can meet the requirements of users.
The following matters should be paid attention to when using the automatic screw packaging machine:
1. Before starting the machine, please carefully check whether the various parts of the automatic packaging machine are in good condition and whether the screws are loose. If there is any problem, please solve it in time.
2. Be sure to clean the feeder to ensure that the products are hygienic.
3. After the machine is turned on, set the temperature of the temperature controller on the man-machine interface, and put on the packaging film.
4. After adjusting the bag making and coding effect, start making packaging bags and feeding materials.
5. Check the sealing condition of the packaging bag and make sure it is completely sealed.
6. During the production process, it is necessary to check the packaging quality of the products from time to time. If any problems are found, the work of the packaging machine should be stopped in time.
7. To use the packaging machine correctly, when the packaging machine is in operation, do not debug each part by hand, which is quite dangerous. Pay attention to safety, safety is important
8. If you find a problem with the packaging machine, please stop running immediately and check and deal with it in time. After the problem is solved, the packaging machine can be started.
9. Check the running direction of the conveyor belt to ensure that the conveyor belt runs in the normal direction.
