Matters that cannot be ignored when the hardware screw packaging machine is operating
The hardware screw packaging machine adopts an advanced microcomputer packaging controller and an excellent man-machine dialogue mode, so that the speed, bag length, and cut point position detection can be directly displayed on the interface. It is widely used in the hardware packaging industry. In addition to the quality of the machine itself, the quality, speed and operation of the packaging cannot be ignored during the production and development of the hardware screw packaging machine.
The following introduces the precautions for the use of the hardware screw packaging machine:
1. Keep away from sharp objects before and after the hardware screw packaging machine is packaged to avoid scratches and air leakage. The vacuum packaging operation is carried out on a clean surface. If there are hard objects such as buttons and zippers in the stored items, please fold them inside and put them in the collection bag. When storing in a cabinet or other local area, also pay attention to whether there are sharp objects in the storage address to ensure that the packaging bag is intact.
2. Pay attention to the size and size of the contents and the packaging bag. After the contents are placed in the bag, they should be at least 3-5 cm away from the seal. Large items should not be forced into it. If required, make a large packaging bag from scratch.
3. Make sure that the seal is cleaned. If fiber or dust enters, the sealing function will be reduced. If dirt is found, it needs to be cleaned before use. Also pay attention to cleanliness in normal storage.
4. After the hardware screw packaging machine is packaged, you need to check the sealing of the vacuum packaging bag again to ensure the seal. This process is very important to ensure the safety of the goods in the later stages.
