Like people, machines need to be properly maintained if they want to extend their service life. Periodic warranty maintenance is required. No matter how good a machine is without maintenance measures, it will lead to early scrapping of the machine. Shorten the service life of the machine.
First of all, mechanical instrument debugging personnel must undergo professional training and be able to master instrument performance, working procedures, operating modes, working conditions, and common fault troubleshooting and handling; untrained personnel are strictly prohibited from operating computer instruments. Routine maintenance must ensure that the inside and outside of the computer instrument box is clean and dry; regularly check that the terminals are not loose or falling off. Ensure that the circuit and gas path are unobstructed.
1. Basic cleaning includes:
1. The metering part should be cleaned in time after the shutdown, such as sugar, Banlangen granules, salt, etc., and the feeding tray and turntable must be cleaned every shift so that they are not corroded.
2. For the heat sealing body, it should be cleaned frequently to ensure the clear texture of the sealing.
3. The photoelectric tracking light-emitting head, that is, the electric eye, should also be cleaned regularly to ensure the small error of cursor tracking.
4. The scattered materials on the tray need to be cleaned up in time to keep the parts clean.
5. Regularly clean the dust in the electric control box to prevent faults such as poor contact.
6. The transmission and moving parts of the new packaging machine must be inspected, tightened, refueled and maintained within a week of use; after that, it must be regularly inspected and maintained every month;
2. Basic maintenance:
1. Regularly check the screws of all parts of the packaging machine to avoid loosening.
2. Pay attention to the waterproof, moisture-proof, anti-corrosion and rat-proof of electrical parts. The inside of the electric control box and the wiring terminals should be kept clean to prevent electrical failures.
3. When the machine is stopped, the two heat-sealing rollers should be in the open position to prevent the packaging material from being scalded.
4. Regularly add oil lubrication to the meshing parts of the gears of the packaging machine, the oil filling holes of the bearing with seats and the moving parts. When adding lubricating oil, please be careful not to drip oil on the drive belt to prevent slippage and loss or belt aging damage
3. Matters needing attention:
1. Before the furniture accessories counting and packaging machine, first observe whether there is any abnormal situation around the machine
2. When the furniture accessories counting and packaging machine is in operation, do not bring the body, hands and head close to or touch the moving parts
3. Never seal your hands and tools into the knife holder.
4. When the furniture accessories counting and packaging machine is running, do not switch the operation buttons frequently. Two or more people operating the automatic counting packaging machine at the same time, turning on the power during repair and maintenance, and the machine working at ultra-high speed for a long time are all incorrect operation methods. Improper operation methods can lead to damage or shortened service life of the furniture accessories counting and packaging machine.
