(9) When shutting down, the heat sealer must be in an open position to prevent burning of the packaging materials and extend the useful life of the heat sealer.
(10) When rotating the metering disc, it is not allowed to turn the metering disc clockwise. Before starting the machine, check whether the blanking doors are closed (except for the open door), otherwise the parts may be damaged.
(11) Metering adjustment When the measured weight of the packaging material is less than the required weight, the adjustment screw ring of the metering disk can be adjusted clockwise to achieve the required packaging amount, and if it is greater than the required weight, the opposite is true.
(12) After the charging operation is normal, the machine can work normally. Turn on the counter switch to complete the counting work, and finally install the protective cover.
