Many small snacks, candies, and small hardware in our lives are packaged and produced by pillow-type packaging machines. The packaging styles of automatic pillow-type packaging machines meet the national safety and health standards. Occupies a large market share in the packaging machinery industry, and the development and progress of the food market has brought a broader development market for packaging machines. Many customers do not have a comprehensive understanding of the pillow packaging machine, and the maintenance of the pillow packaging machine is only the tip of the iceberg. In fact, a comprehensive pillow packaging machine maintenance is divided into three steps, mechanical part, electrical part and mechanical lubrication.
Maintenance of electrical parts:
1. The operator of the pillow packaging machine should always check whether the thread ends at each joint are loose before starting;
2. Tiny particles such as dust may also affect some functions of the packaging machine. When the probe of the photoelectric switch and proximity switch is covered with dust, it may cause malfunction, so it should be checked and cleaned frequently;
3. Detailed parts are also the focus of mechanical cleaning. For example, regularly use soft gauze dipped in alcohol to clean the surface of the horizontal seal electric slip ring to remove the carbon powder on the surface.
4. Some parts of the pillow packaging machine cannot be changed arbitrarily. Non-professionals are not allowed to open the electrical part. The parameters or programs of the inverter, microcomputer and other control components have been set, and random changes will cause the system to be disordered and the machine cannot work normally.
Lubrication of Pillow Packing Machine:
1. Rolling bearings are the parts with severe wear in the machinery, so each rolling bearing should be greased with a grease gun once about two months;
2. Different types of lubricating oil are different, such as the bushing on the packaging film idler, and the bushing at the front sprocket of the feeding conveyor should be filled with 40# mechanical oil in time;
3. The meshing operation of gears is also very important, each gear should be dripped with 40# mechanical oil in a timely manner;
4. The lubrication of the chain is common, relatively simple, each sprocket chain should be dripped with mechanical oil with a kinematic viscosity greater than 40# in a timely manner;
5. The clutch is the key to starting the packaging machine, and the clutch part should be lubricated in good time.
