How to solve the problems of pollution, cleaning, failure, waste, defects and dangerous problems of the screw packing machine?
1. Pollution
There are three main directions for pollution control, one is source control, the other is protection against pollution, and the third is collection, treatment and recycling of pollutants. The most common way to solve pollution during cleaning is to clean up. There are also many ways to clean. According to the actual equipment of automatic packaging machine, different cleaning methods are designed. For example, using compressed air cleaning, in order to avoid dust moving, more industrial vacuum cleaners can be used for cleaning; The parts of the automatic packaging machine should be cleaned by wiping. According to different automatic packaging machine equipment, the wiping tools can make cotton cloth, cotton yarn and soft paper lamp; some need to be wiped with organic solvent, some can not use organic solution; some need to use Kerosene cleaning, some need to use copper brush, and some need to be scraped with copper.
2, cleaning difficulties
There are also three directions to solve the problem of cleaning. One is to control the source, so that these difficult parts are not polluted. The second is to design and develop special cleaning tools to make it difficult to clean and easy to clean. The third is the diversion and treatment of pollutants. Recycling.
3, failure
The key to solving the fault lies in understanding the conditions under which the fault is formed, and controlling or hindering the generation or development of the fault forming condition by some means. Once the fault occurs, it is necessary to analyze the law and cause of the fault, and then take corresponding measures to avoid it, and to find a solution and implement it according to the conditions and reasons for the formation.
4, waste
The wasteful solution must also work from the source of the source. If people do not go out, the air conditioner is not off, the machine does not stop; the waste caused by various leaks, such as water leakage, air leakage, steam leakage, oil leakage, leakage of other media, must adopt various technical means to prevent leaks, If the leakage is not working, it is impossible to prevent leakage, so it is easy to handle and recycle the leakage; for the waste of materials, on the one hand, the raw materials are saved by the improvement of the process and design, on the other hand, the treatment, reduction and reuse of the waste materials can be carried out. Work on the side.
5, defects
The problem of solving defects must start from the most fundamental source, such as the automatic packaging machine equipment itself and the staff operation and maintenance specifications. Only in this way can the problem be solved fundamentally.
6, danger
The dangerous solution relies on the analysis of the on-site environment, finds unreasonable environmental factors, and solves them through re-layout, environmental transformation, redesign and reconstruction, installation of protective facilities, on-site fixed-position management, etc. By installing protection and alarm devices for automatic packaging machine equipment, through strengthening the safety protection, labor protection and training for employees, or through redesigning and improving the process of automatic packaging machine equipment; human operation danger through operational specifications Training and strict management, visualized job tips to reduce and avoid.
