The hardware packaging machine adopts advanced computer combined weighing method, with high measurement accuracy, high efficiency, no shredded materials, and automatically completes feeding, metering, bag making, filling, inflation (exhaust), sealing, coding, and delivery of finished products. , Ten-head (or above) electronic scale measurement system, packaging host, electronic scale support platform, optional Z-type material elevator, finished product conveyor belt, weight selection and coding machine, etc. Scope of application: suitable for fragile packaging of bulk materials that require high measurement accuracy, such as hardware screws, nuts, washers, rubber ring springs, rivets and other hardware parts.
The operating procedure standard of the hardware packaging machine:
1. Before starting the packaging machine, check whether the specifications and models of the cup and bag making device meet the regulations.
2. Turn the main motor to drive the belt by hand to see if the equipment is working flexibly. Only when it is confirmed that the equipment is not abnormal, the power can be turned on.
3. Install the packaged product between the two paper stop wheels under the device and place it in the groove of the paper arm plate of the device. The paper stopper should clamp the core of the raw material so that the packaging product and the production package are aligned with the bag holder, and then tighten the knob on the stopper, and make sure that the packaging printing side is facing forward or the composite contour (ie, the high-pressure polyethylene side) is facing back. After starting, adjust the radial position of the packaged product on the carrier roller according to the paper feeding conditions to ensure normal paper feeding.
4. Connect to the main power switch of the packaging machine, press the clutch rocker to separate the measurement verification mechanism from the main drive system, connect the start switch, and then the equipment runs idly.
The basic cleaning work of the hardware packaging machine mainly needs to complete the following tasks:
1. After closing the packaging machine, the measurement verification part, such as sugar, salt, powder, liquid, etc., should be cleaned immediately, and it must be cleaned every day. Material pallets and roulette, so as not to be corroded.
2. The raw materials scattered in the tray must be removed immediately to keep the parts clean.
3. The optical tracking lamp head (ie, electric eye) should also be cleaned regularly to ensure the slight deviation of the mouse cursor tracking.
4. The main body of the sealing machine should be cleaned regularly to ensure that the sealing line is unblocked.
5. Clean the smoke and dust in the electrical control cabinet regularly to prevent the automatic packaging machine from loosening and other common failures.
