The hardware packaging machine adopts advanced microcomputer packaging controller and excellent man-machine dialogue mode, so that the speed, bag length and cut-point position detection can be directly displayed on the interface. It is widely used in the hardware packaging machinery industry. In addition to the quality problems of the machine itself, the quality, speed and operation of the packaging cannot be ignored.
Here are some notes on the use of hardware packaging machinery:
1. The hardware packaging machinery should pay attention to stay away from sharp objects before and after packaging to avoid scratching and forming a leak. It is best to carry out the vacuum packaging operation on a clean surface. If there are hard objects such as buttons and zippers in the stored items, fold them inside and put them in the collection bag. When you are in the cabinet or other local storage, you should also pay attention to the storage address with or without sharp objects to ensure that the packaging bag is intact;
2, pay attention to the content of the contents and the size of the bag, the contents should be placed in the bag, should be at least 3-5 cm from the seal, large items should not be forced into the package, if necessary, order a large bag from scratch;
3, to ensure that the seal is cleaned, if there is fiber, dust, it will reduce the sealing function. If it is found to be dirty, the demand can be used after cleaning, and it should be kept clean during normal storage;
4. After the hardware packaging machinery is packaged, it is necessary to check the sealing of the vacuum packaging bag again to ensure the sealing. This process is very important to ensure the safety of the goods in the later stage.
