Daily maintenance knowledge of hardware counting packaging machine
The hardware counting packaging machine is a product of advanced technology, which can complete the work tasks in emergencies, so the usual daily maintenance work is very important, which is related to the stable operation and service life of the packaging machine.
First of all, the normal operation of the machine must be correct. The correct operation steps are the primary conditions for the operation of the machine. Normal operation of the hardware counting automatic packaging machine can not only extend the service life of the hardware counting automatic packaging machine, but also reduce the number of automatic hardware counting packaging machines. Failure to improve production efficiency.
The second is daily maintenance. The daily workload of the hardware counting and packaging machine is large, so the machine needs to be in a good lubrication state, and the wheels and chains must be lubricated once a week. The third is the maintenance of the adjustable parts. The height of the worktable, the tightness of the conveyor belt, the height of the upper conveyor and the adjustment of the lower width all need scientific and correct positions to make the machine work normally. Then there are the common faults and maintenance of the automatic hardware packaging machine. When the machine fails, please cut off the power supply. The maintenance personnel should bring anti-electric safety equipment, and can not carry out the maintenance barefoot.
Regularly check whether the screws of each part of the hardware counting and packaging machine are loose, lubricate the important parts of the machine, and clean the surface of the machine, especially the blades must be cleaned with alcohol every day to keep the blades free of foreign matter. After zui is a common fault and troubleshooting method, if the tape is not in the center of the box, adjust the bolts to make the tape stick in the center. If the tape is cut continuously, the problem is that the position of the blade is too low. Just adjust the blade upward, but you can't adjust it too high. If the blade is too high, it will easily scratch the box, so the position of the blade is very important. To the right place.
Contact KALLY company for more inquiries
