First of all, we must pay attention to some things during the operation to ensure the normal use of the paper straw machine.
1. When cutting low, we use a ventilating machine to cut the paper. The cutting height should not exceed 125mm, and if necessary, tighten the iron with a flat pressure. The paper tube machine can only cut paper, and do not cut other materials. When working, you can't reach into the pressure iron and under the blade to prevent cuts. With a dedicated paper cutter, you cannot reach into the rotating mandrel to prevent injury.
2. When edging, we must always pay attention to the entanglement of the trousers into the paper loading shaft to prevent injury or damage to the machine.
3. When adjusting the machine tool, pay attention to the abrasive cloth wheel to prevent the injury.
Secondly, the paper straw making machine needs to be maintained in addition to the relevant prevention during operation.
1. The device must be responsible for the person and prohibit others from moving.
2. The person in charge shall check whether the work, cards, measuring tools and other sundries are placed at all parts of the machine tool at any time, and if found, promptly remove them;
3. Staff members are not allowed to leave their own jobs at will, in order to ensure the safe and normal operation of the machine. If you need to leave the person (the same kind of staff) to look after;
4, to ensure the stability of the working voltage, can not let the click burn out
5. Regularly inspect all internal parts, observe the degree of consumption, and replace all parts with severe wear. Reassembly should be measured with a level gauge and adjust the unevenness of the pump to check and adjust the coaxiality of the coupling.