Case 3: the outer bag prints same content, the volume needs.
If the printed content of the outer bag is same, this situation is best solved and the cost of the solution is relatively low. For example, a customer who packs five series of switches has slightly different switch specifications, but each type has a larger package requirement. In order to standardize the overall product image, we have made a unified packaging film printing, which not only enhances the product's grade, but also reflects the brand's brand benefits.
Case 4. Amount needed, only difference of model number, batch number and quantity
We can check from above picture: The products shown as connecting terminal blocks are pre-loaded with the overall packaging mode of foreign supermarket shelves. Although the terminals have 3 different sizes, but for standard management, the outer bag is uniformly sized for the largest size package. Only the specifications and production batches make a difference. Then, we can understand that the printed content of the whole outer bag is the same, and it can be realized by batch printing one specification. The production batch and specification model are different from the outer bag by the thermal coding machine, and different models can be easily distinguished. Therefore, we say that the content of the outer bag can also be realized in two ways: printing + coding.
The synchronization of the packaging solves the content of the outer bag. This simplifies the process and optimizes the packaging in terms of automated packaging optimization. It is also a good way to improve efficiency.
Friends who are still busy with the labeling process for packaging bags can refer to the reference provided by KALLY for this topic.