Occasionally, there are always customers who report the problem of inaccurate counting. There are many reasons for our analysis. The most basic equipment operating parameter settings, such as the interactive parameters between the blanking and sealing. This step is in place, well, then is the station of the counting device in place or normally sensed? This step is in place. Well, it is necessary to check your packaging materials. Is your packaging material refreshing? (PS: This article focuses on the inclusion of impurities in the packaging materials. The shape of the packaging materials itself is not up to standard.)

    If the packaged workpiece is not refreshing, then the inaccuracy of photoelectric and fiber counts is usually high. Because from the point of view of standard mode counting, it is purely a sensor to measure one at a time, and whether the sensor is a effectively packaged workpiece, there is currently no photographic screening mechanism. From the perspective of efficiency, more than 60% of factories should have the first to achieve priority screening of packaging, and then enter the packaging. Therefore, first screen, then pack, this is a correct process.

Yes, when we are designing any automatic counting and packaging equipment, we will do our best to make the track design and simultaneously consider whether there is a possibility to add other necessary functions. For example, the special design for "packaging material refreshing" - slag design. This is crucial for any counting component. One guarantees that the material packaging process is relatively smooth; the second is that the counting accuracy is higher. However, from the current optimization process, it is not a design that can win all. The design we do this is only a small probability of elimination, not to stop the slag phenomenon.

Above nice packing samples are all from our vertical packing machine,  making clean of packing items are very important before running of automatic counting packaging machine.